Morris Sew-Along: Sleeve Facings

We're now onto the last step of our Morris Blazers, attaching the sleeve facings. To begin, sew the edges of each facing together, press the seams open, and grade the seam allowance.

Next sew the narrower edge of the facing to the edge of the sleeve with the underarm seams aligned. Grade the seam allowance by trimming the facing seam allowance in half.

Press the sleeve facing and seam allowance away from the sleeve.

Next understitch along the edge of the facing, this will help turn the seam line to the inside of the sleeve.

Turn the sleeve inside out and press up the 1/2" seam allowance on the raw edge of the facing.

Then press the entire facing up to the wrong side of the sleeve. Pin in place and stitch along the edge of the facing to secure it to the sleeve.

That's it, you've successfully made a Morris Blazer!