Farrow Sew-Along: Assembling the Dress Back

Today we'll be assembling the back of the Farrow dress. Let's get started!

Farrow Sew-Along: Assembling the Back | Grainline Studio

To begin align the angled edge of one of the back bodice pieces with one of the back skirt pieces. Make sure your right sides are facing each other. Stitch along this seam line at the 1/2" seam allowance.

Farrow Sew-Along: Assembling the Back | Grainline Studio

Farrow Sew-Along: Assembling the Back | Grainline Studio

Finish your seam allowance as desired - we'll be serging for this tutorial - and press the seam allowance towards the back of the garment.

Farrow Sew-Along: Assembling the Back | Grainline Studio

I'm topstitching my seams on this linen version of the Farrow. It's completely unnecessary, I just think it's a cute detail on fabrics like this.

Farrow Sew-Along: Assembling the Back | Grainline Studio

If you're using a slippery fabric or a fabric that shifts a lot, like this Cotton + Steel rayon, I've got a little trick for you to reduce the bias stretch of the fabric on these angled seams. Cut a 1" strip of woven interfacing on the straight grain. Align your back shirt fabric piece on top of the actual pattern piece to make sure your piece hasn't stretched out of shape. Cut the 1" strip of interfacing so that it fits the top seam line and fuse in place. Note that if you're using a taped together PDF pattern you will not want to iron on the tape!

Farrow Sew-Along: Assembling the Back | Grainline Studio

Farrow Sew-Along: Assembling the Back | Grainline Studio

Only fuse a strip to the back skirt piece so that it's less visible on the inside of the garment and isn't irritating to your skin. Align the back bodice and back skirt pieces and stitch along the seam line.

Farrow Sew-Along: Assembling the Back | Grainline Studio

Finish your seam allowance and press towards the hem.

Farrow Sew-Along: Assembling the Back | Grainline Studio

Repeat these steps for the other side of the back. At this point you'll want to finish the center front seams. Again we're serging in this tutorial and we've found it easiest to finish the seams before you sew them together because of the width of the serger foot. If you plan on using a zig zag stitch to finish yours now works great for that, but if you're planning on finishing your seams using the turn and stitch method or by binding them if you're not using too heavy of a fabric, you might want to wait on that till after the next steps.

Farrow Sew-Along: Assembling the Back | Grainline Studio

Align your center back seams with the right sides of the garment facing and stitch along the seam line from the hem edge up to the top notch near the neckline. I usually baste the area above the notch closed so that I can get a good, even press in the next step, then take the basting out after I've pressed.

Farrow Sew-Along: Assembling the Back | Grainline Studio

Press the seam allowances open, from the neckline to the hem edge.

Farrow Sew-Along: Assembling the Back | Grainline Studio

It's a bit hard to see here, but I've topstitched on either side of the seam line. If you're topstitching you want to make sure that you stop at the notch for the back neck opening or you'll have difficulty attaching the facings later. That's it for the back, next up is the front!

Farrow Sew-Along: Assembling the Dress Back | Grainline StudioFarrow Sew-Along: Assembling the Dress Back | Grainline Studio